Fountain Installation Instructions
Please note: Plumbing and electrical requirements may vary with each design. Please read the following carefully, and should you have questions, please contact a Robinson Iron representative to determine what options are best suited to your requirements.

Pool Recommendations
The following recommendations will prevent excessive water loss due to splash.
1. Pool Diameter The pool diameter should be roughly equal to the height of the fountain or larger.
2. Pool Depth A pool depth of at least 7” is generally best for fountains of this nature; a depth of 18” to 24” may be required for interior applications.
3. Water Supply Water supply may be either fresh water or recirculating. A float valve will keep a fresh water supply pool at a constant level. Recirculating pools need periodic water refills to maintain their operational levels. Care should be taken not to operate a recirculating fountain pump without adequate water level in the pool.

Types of Pools
1. Masonry Masonry pools may be constructed in any configuration as long as they conform to the recommended diameter and depth. They are generally utilized with a fresh water supply/float valve arrangement, especially in public installations. Sophisticated plumbing and electrical packages containing timers, lighting, water filtration, etc. are available for installation in a masonry pool. Robinson consultants can provide a design proposal and estimate upon request.
2. Cast Iron Pools by Robinson Robinson Iron manufactures shallow metal pools called ground basins for quick installation of smaller fountains. They are available in several sizes. All have a 1-1/2 “ diameter conduit welded into the center through which the recirculating pump’s electrical cord can pass. This conduit also acts as an overflow pipe during downpours. Each ground basin is fitted with a removable 1/2” diameter brass drain plug for ease of maintenance. Decorated with either an egg and dart or frog and turtle motif, they are extremely heavy and must be handled with a great deal of caution.

Lighting
Submersible lighting is perhaps the most flattering to the fountain’s overall effect. Small freestanding halogen lights are available for shallow pools and for use in the upper tiers of the fountain. Niche lighting should be permanently installed in the masonry pool floor.

Enjoy your Robinson Iron Fountain!